Centor Architectural would like to advise that the A7 Sliding System will be discontinued. It will not be available for order after the 30th September 2008.

download CPU014

Centor Architectural would like to advise that 9TRS, 300mm Radius Steel Track is no longer available.

download CPU013

Centor Architectural would like to advise that the following Solid Brass products are currently being discontinued.

They will be replaced with either Titanium Gold or PVD Brass Stainless Steel.

download CPU012

Centor Architectural would like to advise that the following parts are no longer part of the Centor Product Range:

14FCR
9TS25SS
9TS30SS
9TS40SS

download CPU011

The EW range of hardware now includes a re-engineered bottom pivot. This allows for up to 8mm of horizontal adjustability with a standard flat blade screwdriver and locks automatically into position every half turn.

download CPU010

Centor Architectural would like to advise that the following product is no longer part of the Centor Product Range. It can only be purchased until current stocks are depleted.

download CPU009

For 38mm outward opening doors, built on the concealed floor guide system, the sill is not wide enough to fit a standard Centor dropbolt striker plate. A modified, narrow version of that plate is now available to allow Forte straight dropbolt pins to locate neatly and securely in the sill. The plates are available in polished brass and satin stainless steel.

download CPU008

There is an increasing demand that Centor’s E2 Plus intermediate carriers can be installed either right-hand or left-hand. Centor has responded by slotting its hinges on both ends so the hinges become both handed. The full view of a carrier hinge is only seen when doors are open and stacked, and to some users the ability to have these hinges arranged as either hand is a useful feature. By manufacturing the hinges with two slots, and because carrier pins are removable, the orientation on the pins is a selection that can be made by door makers and installers.

download CPU007

The functionality, appearance and characteristics of the Forte™ and Overture™ units remain unchanged except for one minor detail. The pin travel has been increased while pin lengths remain unchanged. The resulting increase in travel means that the dropbolt is no different to the current version in the locked position. In the unlocked position the effect of this increased travel translates to the pin recessing in to the housing by extra 4mm.

download CPU006

Brushed Metallic finish (X finish) is a close visual match to brushed Stainless Steel hardware. The X finish is a slightly deeper grey in colour than stainless steel, but the angle of inclination to the light source alters the appearance significantly. Viewed when installed on a door the finish is very close.

download CPU005

Centor Architectural would like to advise that the following products are no longer part of the Centor Product Range. Effective immediately the parts cannot be purchased.

download CPU004

With the new Overture Eclipse Dropbolt our range of Overture dropbolts has been increased to complement Centor’s Eclipse E2 Plus, E3 and E4 bi-folding door hardware for inward opening doors. Our dropbolts are stylish, feature enhanced that are a delight to use time after time.

download CPU003

It is obligatory that the child safe chain tensioner is installed. This will prevent children from pulling cords and bead chains around their necks.

download CPU002

Overture Concealed is the latest product in our extensive range of Dropbolts for folding and swinging doors. The Overture Concealed is ideal for use with Centor Architectural’s Eclipse E2 Plus and E3 Folding door systems.

download CPU001